однослойная лазурь с высоким содержанием масладля наружных и внутренних работ
Descriptionесины И ЗАЩИТНИК - декоративная деревянная окраска в полупрозрачных цветовых оттенках для всей внешней и внутренней работы по дереву. Это производит гладкое прозрачное, атлас матовая поверхность. Зерно и структура леса подчеркнуты. Osmo Индустриальный ЦВЕТ СТРАНЫ доступен в белом непрозрачном полу блеске (5730) и в белом непрозрачном атласе, матовом (5731).
Индустриальные краски Osmo - естественная нефть, базируемая, микропористая, регулирование влажности, водоотталкивающее и чрезвычайно погода и УЛЬТРАФИОЛЕТОВЫЙ стойкий. Конец не будет раскалываться, ряд, кожица или пузырь. Легко примениться, не будет сохнуть в течение заявления (никакой brushmarks) и легко возобновить (только применяют дальнейшее пальто). Индустриальные краски Osmo - идеальный продукт для торговли и промышленности - sprayable и быстро высыхания. Это было испытано в течение многих десятилетий при severest выгодных условиях
|
|
стриальные краски - естественная базируемая нефть. Естественная нефть проникает глубоко в лес, держа это упругий и здоровый, и препятствуя этому стать сухой и ломким. Сокращение и опухоль уменьшены. Лесу позволяют дышать. Влажность может испариться.
Здоровье и окружающая среда Osmo Индустриальные краски не содержат никаких биоцидов или консервантов. Принцип Osmo, чтобы изготовить и поставлять только продукты, которые являются безопасными и безвредными для окружающей среды в течение производства так же как для заявления, привел к успешному свидетельству согласно ШУМУ В Международная Организация по
Стандартизации 9001 (качественное управление) и ШУМ В Международная Организация по Стандартизации 14001 (экологическое управление) TЪV (Технический Пульт управления) Rhineland.
|
|
|
|
|
|
|
|
Применение . ота по дереву, которая желательна, чтобы поддержать ее естественное появление, как деревянные оболочки, балконы, окна, вагонетки, панели, ослепляют, дачи, цветочные коробки, зеленые здания, перголы, заборы, экраны, деревянные ворота и палубы.
Osmo Industrial WOOD STAIN and PROTECTOR is available in 7 semi-transparent natural colour shades and one colourless shading-stain:
No. 5000 Shading-stain (colourless)
No. 5710 Spruce
No. 5701 Pine
No. 5702 Oak
No. 5705 Larch
No. 5709 Teak
No. 5729 Western Red Cedar
No. 5901 White
All shades are intermixable.
When using several cans with different batch numbers please mix together in one large container to ensure uniform coloration.
As the transparent colour will be influenced by the natural colour of the wood, the result can deviate from the colour shown on the colour card. As a rule corresponding or slightly darker shades will give the best results (trial application recommended).
Light shades are less UV-resistant than dark shades and should preferably be used for sunprotected areas.
Osmo Industrial COUNTRY COLOR is available in white opaque semi gloss (5730) and in white opaque satin matt (5731).
No. of coats required
two coats
- for renovation usually one coat
Can sizes
2.5 litres and 8 kg
Larger volumes please enquire.
Coverage
1 litre will cover approx.:
12 m² smooth wood, two coats
20 m² smooth wood, one coat
Rough or striated wood in general needs more material due to its surface structure.
Surface preparation
Wood surface must be clean, dry (maximum moisture content 20 %), and frostfree.
Old paints and varnishes must be removed (by Osmo PAINT REMOVER or by sanding).
Old micro-porous stains only need to be cleaned.
Where possible apply first coat on all sides of the wood before installation.
If additional protection against blue stain, rot and mildew is desired, pre-treat with Osmo IMPREGNATION WR BASE COAT* and allow 12 hours to dry. (*Use biocides safety. Always read the label and product information before use.)
If a biocide-free water repellent protection is preferred, apply Osmo Wax Impregnation WOOD PROTECTOR without synthetic biocides.
Compatibility
The products are compatible with Osmo WOOD STAIN AND PROTECTOR, Osmo ONE COAT ONLY, Osmo CLEAR OIL WOOD FINISH, Osmo WOOD OILS as well as other micro-porous stains and semi-oil wood finishes and pressure impregnated wood.
Corrosion
In areas of high humidity the use of galvanized, non-oxidizing nails and fasteners is recommended.
Method of application
Osmo Industrial paints are ready to use.
Please do not thin. Stir thoroughly.
The Industrial paints can be applied by spray painting (e.g. HVLP = High Volume Low Pressure or Airless) as well as other methods (brush or with cloth).
Usual coverage:
1. First application:
application amount appr. 35-40 g/m²,
dust-dry:
approx. 2-3 hrs at room temperature/
approx. 1 hr. at 50°C convection dryer;
ready for sanding: 6-8 hrs./2-3 hrs.
2. intermediate sanding can be done with grain P 220 or finer
3.Second application:
applicaton amount approx. 35-40 g/m². dust-dry:
approx. 2,5 hrs at room temperature / approx. 1 hrs at 50°C convection,
after 12-16 hrs stackable.
If a more satin surface is desired , finish with one coat of Osmo CLEAR OIL WOOD FINISH 000. This will also prolong the durability of the finish.
Cleaning of tools
With Osmo Brush Cleaner (benzene-free) or white spirit.
Maintenance
Very simple. Just a further coat on clean, dry surface.
Storage
Can be stored up to 5 years or more if can is full and tightly closed. Store in dry place. If thickened by frost it will regain its normal consistency under normal temperatures within 24-36 hours.
Ingredients
35-50 % solids’ content
Base: natural vegetable oils
(sunflower oil, soybean oil),
Pigments: iron oxide and organic
pigments, titanium dioxide
(white pigment), all approved
for use in the food sector
Solvents: disaromatized white spirit -
(benzene-free in compliance
with purity demands of the
European Pharmacopoeia)
Additives: water-repellent additives,
siccatives (drying agents).
Full declaration of ingredients upon request
Technical Data
Specific gravity: 0.9 - 1.2 g/cm3
Viscosity: 60-70”, 2 mm according
to DIN 53 211, thin
Odour: mild, odourless after
drying
Flashpoint: > 25 °C.
Fire conduct in compliance with demands of German DIN 4102 (fire conduct of building materials and components) Class B2 (normal inflammability).
Precaution
Flammable. Keep out of the reach of children. Do not fill into containers normally used for food and drink. Work in areas with good ventilation. Do not apply in the presence of naked flames, hot surfaces or unprotected electrical equipment. In case of contact with eyes rinse immediately with plenty of water. Contains 2-butanonoxime. May produce an allergic reaction.
Wash out any used cloth immediately or store in a airtight container (danger of self ignition).
Do not use the Osmo Industrial paints together with nitro cellulose laquers or nitro cellulose stains in the same spray booth (danger of self-ignition).